THE INFORMATION MODE
The console features an information mode that keeps track of the total distance that the walking belt has moved and the total number of hours that the treadmill has been used. The information mode also allows you to select miles or kilometers to measure distance, and to turn on and turn off the display demo mode.
To select the information mode, hold down the Stop button while inserting the key into the console and then release the Stop button. When the information mode is selected, the following information will be shown:
The Time display will show the total number of hours the treadmill has been used.
The Distance/Incline display will show the total number of miles or kilometers that the walking belt has moved.
An “E” for English miles or an “M” for metric kilometers will appear in the Calories/Pulse display. Press the Speed in- crease button to change the unit of measurement if de- sired.
The console features a dis- play demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function nor-
mally when you plug in the power cord, switch the reset/off circuit breaker to the reset position, and insert the key into the console. However, when you remove the key, the displays will remain lit, although the but- tons will not function. If the demo mode is turned on, a “d” will appear in the Speed display while the informa- tion mode is selected. To turn on or turn off the demo mode, press the Speed decrease button.
To exit the information mode, remove the key from the console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs stereo sound system, you must connect your MP3 player, CD player, or other personal audio player to the console through the audio jack below the television. To use the audio jack, plug the audio wire into a jack on your MP3 player, CD player, or other personal audio player. Make sure that the audio wire is fully plugged in. While the audio wire is plugged in, the television audio will not function.
Next, press the Play button on your MP3 player, CD player, or other personal audio player. Adjust the vol- ume on your personal audio player or press the Volume increase and decrease buttons on the con- sole. To use headphones, plug the headphones into the headphone jack near the Stop button.
If you are using a personal CD player and the CD skips, set the CD player on the floor or another flat sur- face and not on the console.
HOW TO ADJUST THE CUSHIONING SYSTEM
The treadmill features a cushioning system that re- duces the impact as you walk or run on the treadmill. To increase the firmness of the walking platform, step off the treadmill and slide the platform cushions toward the front of the treadmill. To decrease the firmness, step off the treadmill and slide the platform cushions toward the back of the treadmill. Note: Make sure that both cushions are set at the same firmness level. The faster you run on the treadmill, or the more you weigh, the firmer the walking platform should be.
Platform |
|
Cushion | Increase |
| |
Decrease | Platform |
| Cushion |
| Walking Platform |
28
