NordicTrack NTST07900 user manual Assembly

ASSEMBLY

Assembly requires two people. Place all parts of the stepper in a cleared area and remove the packing mate- rials. Do not dispose of the packing materials until assembly is completed. In addition to the included allen

wrenches, assembly requires an adjustable wrench , and a rubber mallet .

As you assemble the stepper, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 18. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-assem- bled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.

M8 Nylon	M10 Nylon	M10	Split	M8 Split
Locknut (28)–4	Locknut (27)–4	Washer	(30)–10	Washer (54)–4

M8 x 35mm	Console	M10 x 25mm Button
Button Bolt (24)–4	Screw (57)–4	Screw (29)–4
	M10 x 82mm Bolt (26)–4

M10 x 91mm Bolt (63)–2

4