Nortec Industries Airfog Series installation manual Spare Parts

1.SPARE PARTS

A.Typically some spare parts are ordered with an AIRFOG system. These parts and kits are to be retained in some safe location in a workshop for immediate access. It is recommended that spare parts and repair kits be replaced as soon as they are consumed.

B.Some NORTEC AIRFOG humidification system owners choose to not maintain in-house spares or repair kits as there is sufficient redundancy built into the original design to remain fully operational even if a few nozzles have to be shut down (disconnecting the air pressure tube or removal and capping off the water and air delivery nozzle tubes). The lead time to obtain replacement parts or repair kits is considered an acceptable risk. Other owners decide that this risk is too high and choose to maintain spare parts and repair kits in-house so that rapid repairs can be made.

Part #

1603115

1603117

1603118

1603119

1603120

1603122

1609503

1603116

Table 1. Rebuild Kits and General Parts

Description

Repair kit for Watts pilot water regulator (1603114 / 1603004) Repair kit for Watts pilot water regulator (1609412 & 1603112) Repair kit for Norgren panel mounted air regulator (1603001)

Repair kit for Norgren brass water pressure regulator (1603002) Repair kit for AFE Nozzles (1609209, MINI, Octo)

Diaphragm repair kit for vacuum valve (1609000) Filter for Air Pressure Control Section (1609401) Repair Kit for 1603104 Regulator

10-70

Page 46 2008-04-11