30 Configuration Management | Nortel Networks Confidential |
|
|
please refer to the Configuration chapter in the MCP SIP Application Module Basics document.
Configuring third-party gateway interworking
The provisioning tasks required for the MCP to interwork with
Configuring traditional phone interworking
Provisioning tasks to configure the MCP to interwork with traditional phones must be made on both the MCP side and the existing switching system.
MCP configuration
The provisioning tasks to configure an MCP user as a CDS user are described in detail in the User Management chapter of the MCP SIP Provisioning Client User Guide document.
Switching system configuration
This section describes the steps to configure and activate the SimRing feature on the Nortel Networks DMS family of TDM switches. Please refer to feature document AJ4934 Simultaneous Ringing for more information about the functionality provided by SimRing.
For specific information on enabling the SimRing equivalent feature on
Successful interworking between the MCP and the TDM switch requires that the TDM switch activate the SimRing (or equivalent) feature and assign each CDS user a SimRing number. The SimRing (or equivalent) feature sends “SimRing” calls to the routable and unique number for each CDS user.
Figure 6 shows the conceptual steps required for provisioning the SimRing (or its equivalent) feature on a TDM switch.
Copyright © 2003, Nortel Networks |
