Connecting to a Computer
When connecting the camera to a computer via the supplied USB cable while Auto (default setting) is selected for the Charge by computer option (A 152) in
the setup menu, the battery inserted into the camera is automatically charged using power supplied by the computer.
See “Before Connecting the Camera” (A 126) and “Transferring Pictures from a Camera to a Computer” (A 127) for more information on connecting the camera to a computer.
Charge Lamp
The following chart explains charge lamp status when the camera is connected to a computer.
Charge lamp | Description | |
Blinks slowly (green) | Battery charging. | |
Off | Battery not charging. If the charge lamp changes from slow blinking | |
(green) to off while the | ||
| ||
| • Charge the battery indoors with an ambient temperature of | |
| 5 °C to 35 °C (41 °F to 95 °F). | |
| • A USB cable is not correctly connected or the battery is faulty. | |
Flickers (green) | Reconnect the USB cable correctly or replace the battery. | |
• Computer is in sleep mode and does not supply power. | ||
| ||
| Reboot a computer. | |
| • The battery cannot be charged as computer’s specifications or | |
| settings does not support power supply to the camera. |
BNotes on Charging with Connection to a Computer
Printers and Computers Televisions, to Connecting
•The battery cannot be charged, nor can data be transferred, when the camera is connected to a computer before the camera’s date and time have been set (A 22). If the camera’s clock battery (A 142) has been exhausted, the date and time must be reset before the battery can be charged
or images can be transferred with connection to a computer. In this case, use the Charging AC Adapter
•If the camera is turned off, charging will also stop.
•If a computer enters sleep mode while charging, charging will stop and the camera may be turned off.
•When disconnecting the camera from a computer, turn the camera off and then disconnect the USB cable.
•It may take longer to charge the battery with connection to a computer than with charging using the Charging AC Adapter
•When the camera is connected to a computer, an application installed on the computer, such as Nikon Transfer, may start. If the camera was connected to the computer for the sole purpose of charging the battery, exit the application.
•The camera turns off automatically if there is no communication with the computer for 30 minutes after the battery has finished charging.
•Depending upon computer specifications, settings, and power supply and allocation, it may be
impossible to charge the battery inserted into the camera via computer connection. | 131 |
|