Connecting to a Printer
1 Turn off the camera.
2Turn on the printer.
Check printer settings.
3Connect the camera to the printer using the supplied USB cable.
4 The camera automatically turns on.
When properly connected, the PictBridge startup screen
(1) will be displayed in the camera monitor, followed by the Print selection screen (2).
12
Print selection
15 05 2010 | 4 | 4 | |
|
|
|
|
Printers and Computers Televisions, to Connecting
BConnecting the USB Cable
Be sure that connectors are properly oriented. Do not attempt to insert connectors at an angle, and do not use force when connecting or disconnecting the USB cable.
BIf the PictBridge Screen is not Displayed
Turn the camera off and disconnect the USB cable. Set Charge by computer (A 152) in the camera’s setup menu to Off and reconnect the cable.
133