Step 1 Turn the Camera On and Select A(Auto) Mode
Indicators Displayed in A(Auto) ModeShooting mode
Adisplayed in A(auto) mode.
11
Internal memory indicator
Indicates that images will be stored in the camera’s internal memory (approximately 45 MB).
When a memory card is inserted in the camera, Cdoes not appear and images will be stored on the memory card.
Motion detection icon The effects of subject movement and camera shake are reduced.
Image mode
The combination of image quality (compression) and image size is displayed. The default setting is M4000×3000.
and Photography Basic
•Tap Ato change the information displayed in the monitor (A 10).
•When the monitor has turned off in standby mode to save power, press the following button to reactivate it (A 149).
- Power switch, the
BNote on Touch Shutter
At the default setting, the shutter can be released by simply tapping a subject in the monitor (A 34). Take care that you do not release the shutter accidently.
Mode (Auto) APlayback:
DFunctions Available in A(Auto) Mode
•The touch shutter (A 34), touch AF/AE (A 37), or subject tracking (A 40) function can be enabled.
•The flash mode (A 42) can be adjusted, the
•Tapping Fto specify settings for all shooting menu items (A 47) according to the shooting conditions.
DMotion Detection
See Motion detection (A 146) in the setup menu (A 138) for more information.
DElectronic Vibration Reduction
When the flash mode (A 42) is set to W(off) or Y(slow sync) with Electronic VR (A 145) in the setup menu set to Auto, the ricon may be displayed in the monitor. When ris displayed, the
effects of camera shake may be pronounced under the current shooting conditions. In these |
|
situations, the camera reduces the effects of camera shake in pictures before recording them. | 27 |
|