Connecting to a Printer
1Turn off the camera.
2Turn on the printer.
Check printer settings.
3Connect the camera to the printer using the supplied USB cable.
Printers and Computers Televisions, to Connecting
4The camera is automatically turned on.
When properly connected, the PictBridge startup screen (1) will be displayed in the camera monitor, followed by the Print selection screen (2).
12 Print selection
15/05
2010
NO . 32 32
B Connecting the USB Cable
Be sure that connectors are properly oriented. Do not attempt to insert connectors at an angle, and do not use force when connecting or disconnecting the USB cable.
B If the PictBridge Startup Screen Is not Displayed
Turn the camera off and disconnect the USB cable. Set the Charge by computer option (A140) |
|
in the camera’s setup menu to Off and reconnect the cable. | 119 |
|