SECTION THREE - Interfacing
Aux port format Outputting DGPS corrections to another source
Aux port baud rate
Diagnostics
The aux port’s DIAG option is for factory diagnosis of 961 operating parameters. Do not turn this function on.
Port off
Use the OFF setting when the aux port’s input or output functions aren’t needed.
The aux port’s baud rate must match the external device’s baud rate; refer to the external device’s instructions for the correct baud rate setting, then follow the instructions on the previous page for changing an aux port set- ting.
Setting PPNM
To access the pulses per nautical minute (PPNM) options:
1.Press the STAR key to access the SERVICE MENU screen.
2.Press the PORT SETUP key, then press the PPNM key.
3.The 961 displays the PPNM OUTPUT SETUP screen with options for number of pulses,
Figure 28: PPNM output setup screen
961 INSTALLATION MANUAL Revision A | Page 55 |