Figures
Figure 1: 961 control head | 10 |
Figure 2: 961 control head | 10 |
Figure 3: 961 control head | 11 |
Figure 4: Processor connectors (back of unit) | 13 |
Figure 5: Separation distances between antennas | 15 |
Figure 6: | 17 |
Figure 7: Stripping the coax cable jacket | 18 |
Figure 8: Flared cable braid | 18 |
Figure 9: Completed BNC connector | 19 |
Figure 10: Combo GPS/DGPS antenna | 19 |
Figure 11: Correct | 20 |
Figure 12: Stripping the coax cable jacket | 21 |
Figure 13: Flared cable braid | 21 |
Figure 14: Completed TNC connector | 21 |
Figure 15: ACU assembly | 23 |
Figure 16: Correct AN150 and 8410 wiring | 24 |
Figure 17: | 26 |
Figure 18: Initial startup screen | 27 |
Figure 19: System test screen | 27 |
Figure 20: Owner’s message screen | 28 |
Figure 21: Advisory message | 29 |
Figure 22: GPS satellite status screen | 30 |
Figure 23: Interface cabling wiring screen | 45 |
Figure 24: Port 1 output setup screen | 47 |
961 INSTALLATION MANUAL Revision A | Page iii |