NorthStar Navigation Explorer 721EU Radio Setup Menu Radio Setup, Select the Channel Bank UIC

Section 3 - Radio Setup Menu (RADIO SETUP)

Hold down CALL/MENU then scroll down and select RADIO SETUP. Press ENT or push the rotary knob to show the RADIO SETUP menu options.

Sections 1-3 and 1-4 explain how to navigate around the menu and enter, save and change data.

3-1 The Radio Setup Menu Options (RADIO SETUP)

UIC (721US only)	Select the channel bank (721US only)
	See Section 3-2.
CH NAME	Edit or delete channel names.
	See Section 3-3.
RING VOLUME	Set the volume level of the incoming call notification beeps.
	See Section 3-4.
KEY BEEP	Set the volume level of the beeps.
	See Section 3-4.
INT SPEAKER	Turn the radio’s internal speakers ON or OFF.
	See Section 3-5.
WATCH MODE	Select Dual or Tri watch scanning.
	See Section 3-6.
WX ALERT (721US only)	Turn the WX Alert scanning mode ON or OFF. (721US only)
	See Section 3-7.
COM PORT	Select NMEA or NAVBUS protocol for communications between the radio and any
	other instruments.
	See Section 3-8.
BARO SENSOR	Select the barometric units, calibrate the sensor, turn the display ON or OFF.
	See Section 3-9.
	Select the temperature units, calibrate the sensor.
TEMPERATURE	See Section 3-10.
	Select the HAPPY FISH alarm to be ON or OFF.
HAPPY FISH	See Section 3-11.

3-2 Select the Channel Bank (UIC)

721US only.

There is a choice of three channel banks; USA, International, or Canadian (see Appendix C for details).

RADIO SETUP

>UIC

CH NAME RING VOLUME

UIC

>USA INT’L

CANADA

1.Select RADIO SETUP.

2.The cursor is at UIC. Press ENT or push the rotary knob to display the list of channel banks.

3.Select the channel bank to use then press ENT or push the rotary knob to confirm the setting and return to the menu.

Northstar Explorer VHF Series: 721US, 721EU Operation and Installation Manual 21