Nostalgia Electrics ICM-562 manual How To Use, Putting Your Machine Together, English

ENGLISH 5.

HOW TO USE

After Taking The Unit Out Of The Box

A.Your OLD FASHIONED SOFT SERVE ICE CREAM MAKER
needs little assembly. Before first use, wipe clean the inside of the unit with a non-abrasive moist sponge or a non-abrasive towel or cloth and then wipe with a non-abrasive dry towel. See breakdown picture on page 6.

B.After cleaning the inside, put the top back on the base of the unit. See page 8, illustration A.

C.Wash the mixing paddle, the lid, and the freezer drum.

Now you are ready to enjoy cool, refreshing ice cream from your OLD FASHIONED SOFT SERVE ICE CREAM MAKER.

To Begin using your Soft Serve Ice Cream Maker

First, after washing, place the drum in the freezer 24 hours or overnight depending on the temperature in your freezer to get it to the proper (-15° to -20° ) temperature for processing your ice cream.

Find a stable surface near an electrical outlet before starting. (Make sure the cord is away from any water source. If needed, it is acceptable to use an extension cord.)

Choose your desired recipe and prepare the mixture in advance, allowing it to chill in the refrigerator to achieve the desired temperature.

1.Plug in your unit in the OFF position.

2.Remove the drum from the freezer and place it in the OLD FASHIONED

SOFTSERVE ICE CREAM MAKER.™ Make sure the drum is fitted correctly It he unit enabling the lid to close properly and mixing to proceed. See page 9, Illustration B.

3.Place the mixing paddle into the drum, as pictured in Illustration C, on page 9.

4. Make the sure the spout is connected to the unit by turning counter clockwise and locking into place. Make sure the

spout is closed by lifting up the handle.

ENGLISH 9

PUTTING YOUR MACHINE TOGETHER

Place the crown top onto the

Base of the unit.

Illustration A

Place the drum inside the crown top. Make sure the drum is fitted correctly in the unit.

Illustration B

Place the mixing paddle into the

Drum.

Illustration C

Place the lid on the crown and lock into place. Place the motor unit on, properly seating the motor rest and fitting the motor arm over the mixing paddle stem.

Illustration D

After the motor is properly seated into the motor rest portion of the lid, the unit is ready to turn on and add your liquid mixture.

Illustration E