Nova LM-700 manual Exit Program Mode End, Key Icons, Program Mode Screens, Set Numerical Display

5.11 Exit Program Mode “End”
Press the Enter key to exit Program Mode and return			Figure 5.0.1	Key Icons
to User Mode.
NOTE:	To clear all values and restore factory			Guide To Icons
	settings, press and hold the Scroll key
	for two seconds, then press the Enter			Next key—moves
	key (while still pressing the Scroll
	key). “FAC” will appear to indicate			Scroll key—changes
	that you have restored factory
	settings and cleared the dispenser’s			Enter key—action
	memory (including counter reset to
	zero). Press the Enter key again to			Gray (left) digit indicates blinking
	return to User Mode.
Figure 5.0		Program Mode Screens
Prime Pumps		Selects Pump Number	Figure 5.0.2	Set Numerical Display
				Set Value Screens

THEORY OF

OPERATION

MECHANICAL INSTALLATION

ELECTRICAL INSTALLATION

PROGRAMMING

Clear Load Counter

2 Sec

Operating Parameters

2 Sec

2 sec

= Reset All

Enter Screen

2 sec

= Au (Automatic)
Pb (Push button)
oc (Occurrence)
r	(Relay)

Moves Blinking Digit (when applicable)

Set Value/Exit Screen

Changes Digit Value

USER MODE

OPERATION

TROUBLESHOOTING

Lockout Period Minutes (00.0 = Lockout off)

Formula Program	Pump Amount		Seconds (Stopwatch Input)
	Selects Formula	2 Sec	2 sec

SPARE PARTS LISTING

Filter Duration

User Prime

Seconds (1-19)

= on/off

2 Sec

Delay Time

Assign Pump (oc Mode only)

Seconds (Minutes in Pb Mode)

On = Minutes

Signal Occurrence

MAINTENANCE & SPECIFICATIONS

INDEX

Password Edit Password

Finish Program

Return to Formula Program Menu

Exit Program Mode	Factory Reset
Return to User
Formula Menu	Return to User
2 sec	Formula Menu

P/N 20-07121-00 Rev. C Page 9