Novatel GM-14915118 quick start POST-PROCESS Data, Questions or Comments

POST-PROCESS DATA

Post-processing requires collection of simultaneous data from the base and rover stations. This includes accurate coordinates of the base station and accurate measurement of the IMU to antenna separation.

Collect the following data for post-processing:

•From the base station

•RANGECMPB ontime 1

•RAWEPHEMB onchanged

•GLOEPHEMERISB onchanged (if using GLONASS)

•From the rover station(s)

•RANGECMPB ontime 1

•RAWEPHEMB onchanged

•GLOEPHEMERISB onchanged (if using GLONASS)

•RAWIMUSXB onnew

•IMUTOANTOFFSETSB onchanged

•VEHICLEBODYROTATIONB onchanged

SPAN system output is compatible with Inertial Explorer® post-processing software from the Waypoint® Products Group, NovAtel Inc. Visit our website at www.novatel.com/products/software/ for details.

QUESTIONS OR COMMENTS

If you have any questions or comments regarding your SPAN system, contact NovAtel Customer Service by:

Email: support@novatel.com

Web: www.novatel.com

Phone: 1-800-NOVATEL (U.S. & Canada) 1-800-668-2835

1-403-295-4500 (International) Fax: 1-403-295-4501

NovAtel, SPAN, Inertial Explorer and Waypoint are registered trademarks of NovAtel Inc. NovAtel Connect and OEM6 are trademarks of NovAtel Inc.

Windows is a registered trademark of Microsoft Corporation. © Copyright 2013 NovAtel Inc. All rights reserved.

Printed in Canada on recycled paper. Recyclable. Unpublished rights reserved under international copyright laws.

12