CDN-34S
BEFORE SWITCHING OFF THE POWER:
When you have finished using the CD player, be sure that the disc tray is closed with the “OPEN/CLOSE” button before switching off the power.
DO NOT switch off the power when | Switch off the power after the |
the disc holder is open. | disc holder has been closed |
| with the “OPEN/CLOSE” button |
TROUBLESHOOTING:
Symptom | Possible Cause | Corrective Action |
|
|
|
The power fails to switch on | Poor power plug connection at | Insert the power plug firmly into |
when the POWER switch is set | the AC outlet or IEC Power cord | the AC outlet and make sure |
to on | loose from rear of unit | connection is good in unit rear |
Disc play does not start | The disc is loaded upside down | Reload the disc with the label |
| The disc is too dirty | side up |
|
| |
|
| Clean the disc |
|
|
|
No sound | Improper output cable | Connect the output cables |
| connections | correctly |
| Improper amplifier operation | Check amplifier setup |
Sound skips | The CD player is subject to | Change the installation location |
| vibrations or physical shock |
|
| The disc is too dirty | Clean the disc |
Programmed disc play will not | The CD player is in normal disk | Hold down the Program button |
function | play mode | for 3 seconds then program the |
|
| tracks |
Hum | Loose cable connections | Firmly connect all audio plugs |
|
|
|
©2001 Numark Industries | - The Leader in DJ Technology | http://www.numark.com |
- 18 - |
