Nuvo NV-T2DF manual Antenna Input, USB and RS232 Communication, Page

Antenna Input Fig . 7

The T2 ships with a proprietary amplified AM/FM antenna. This antenna is designed to work only with the NuVo T2 series tuners. It can be located up to 200 feet from the tuner location, and we recommend 75-ohm RG 6 coaxial cable with a standard F style connector on each end. Simply attach the cable to the connector at the bottom of the antenna, and into the “Antenna Input” on the T2, fig. 7. Once connected, the T2 should immediately receive broadcast signals and RDS (Radio Data Service) when it is available.

We recommend placing the antenna inside in an attic or as high as possible for the best possible AM and FM reception, fig. 8. A 2 meter (6 foot) pre-terminated coaxial cable is provided with the tuner package for testing the antenna connection or if you choose to place the antenna close to the tuner location.

USE ONLY NuVo

NV-T2PAS

POWERED ANTENNA SYSTEM

IN

ANTENNA INPUT

AUX IN	OUT
L	TRIGGER
	ON=+12V

RAUDIO OUTPUT

TUNER B

AUX IN OUT

	TRIGGER
L	ON=+12V
R	AUDIO
	OUTPUT

TUNER A

Fig . 8

USB and RS232 Communication

The T2 has two serial communication ports. These allow for complete control of the T2 functions by RS232 control devices. The necessary protocol for RS232 control is available through the NuVo Website Prozone at www.nuvotechnologies.com/prozone.

Page 10