IV. Using the T2 with the Concerto NuVoNet
Fig. 20
Setting Up the Tuner for NuVoNet
The T2 must be set for one of the Concerto source inputs
| NuVoNet | Model | |
| Dual XM Tuner | ||
IR | NuVo Techonlogies LLC•Cincinnati Ohio USA | ||
| IN | OUT | www.nuvotechnologies.com |
USB | RS 232 |
IR INPUT | TEK |
SYSTEM | 3033118 |
RTEK
Making Sure Your Concerto Is Ready for NuVoNet Use
Your Concerto System must be updated with at least software version 1.40 for proper NuVoNet communication with the T2. To check what Configurator version you currently have, open the Concerto Configurator software on your computer by
When this is done, open the applicable configuration from your configuration files or retrieve the configuration from the Concerto main unit. Once the appropriate configuration is opened, go to the Source tab and place the T2 IR library in the appropriate source locations
Making the Connection
Prior to connecting to NuVoNet, the Concerto must have the correct Configuration version downloaded with the T2 representing two of the audio sources.
Making the NuVoNet connection is done simply by connecting the “NuVoNet” output on the T2 to one of the “Peripheral Device” inputs on the Concerto EZ Port, fig., 22. This connection will then enable bi- directional NuVoNet communication with the Display Pads.
Fig. 21
Fig. 22
|
| 1 | 2 | 3 |
VOLUME |
| 4 | 5 | 6 |
|
| |||
|
| 7 | 8 | 9 |
SOURCE | PLAY | +10 | 0 | ENT |
| NuVoNet |
| Model |
|
| |
|
| Dual XM Tuner |
|
| ||
IR | NuVo Techonlogies LLC•Cincinnati Ohio USA |
|
| |||
| IN | OUT | www.nuvotechnologies.com |
|
| |
|
|
| USB | RS 232 |
|
|
IR INPUT |
|
|
| E RTE | K | TERTEK |
|
|
|
| |||
|
| SYSTEM |
| 3033118 |
|
Network Cable