Nuvo NV-T2DF manual T2 Configuration Software, Start, 1.1New Config, 2.1NuVoNet Operating Mode

T2 Configuration Software

Basic setup and operation of the T2 is easily done from the front panel, the included T2RC3 remote, or the Concerto Display Pad. The T2 package includes the T2 Configurator setup software designed to quickly move you through the Tuners' setup options in a methodical fashion, and allow access to the more advanced setup features. Configurations are saved as files in the software's “Config” folder. Once complete, configurations can be used as templates for future installations.

1.0 Start

The start tab allows you to load an existing configuration, or create a new one. You can also retrieve a configuration from the T2 and edit it.

1.0 Start

1.1After you have opened a configuration, the next step is the Config Tab.

1.1New Config

2.0 Config

The Config tab is for the initial setup, which determines basic tuner operation.

2.1NuVoNet Operating Mode: This drop down menu allows you to select between “Stand-alone” or as a Concerto source 1- 6. If you are using the T2 as NuVoNet source for Concerto, you must select a unique, dedicated source input for each Tuner (A or B) being configured.

2.1NuVoNet Operating Mode

Page 19