Nuvo NV-T2DF manual Stereo Audio Connections, Direct IR Control

I. Installing the NV-T2DF Dual Tuner

Fig . 1

Stereo Audio Connections

Each tuner has two audio output jacks. One is a stereo RCA connection, and the other is a stereo 3.5mm mini. The RCA output is an individual left and right channel connection made with a standard RCA cable. The other end is connected to the corresponding audio input on the back panel of the audio amplifier. An example of this is one of the source inputs on the back panel of a NuV0 audio distribution system, fig. 1.

USE ONLY NuVo		AUX IN		OUT		AUX IN	OUT
							TRIGGER
	NV-T2PAS		L		TRIGGER	L
POWERED ANTENNA SYSTEM					ON=+12V		ON=+12V
			R		AUDIO	R	AUDIO
					OUTPUT		OUTPUT
IN
ANTENNA INPUT				TUNER B			TUNER A
VARIABLE		VARIABLE			VARIABLE		VARIABLE
OUTPUT	SPEAKER	OUTPUT	SPEAKER		OUTPUT	SPEAKER	OUTPUT
TIP=L	40W/6 OHMS X 2	TIP=L	40W/6 OHMS X 2		TIP=L	40W/6 OHMS X 2	TIP=L
	LEFT RIGHT		LEFT	RIGHT		LEFT RIGHT
RING=R		RING=R			RING=R		RING=R
FIXED		FIXED			FIXED		FIXED
OUTPUT		OUTPUT			OUTPUT		OUTPUT
ZONE 1		ZONE 2			ZONE 3		ZONE 4

1	2	3	4	5	6	1	2	3
						CONNECT TO
	L		L		L	NV-I8X
						USE NV-SLC1
						CABLE
	R		R		R
1	2	3	4	5	6	4	5	6

SOURCE INPUTS SOURCE LINK SOURCE STATUS

The 3.5mm stereo output labeled “AUDIO OUTPUT” is also available for system connection. Compatible cables are available with the male mini connection on each end, or with a stereo RCA connection on one end, fig. 2.

Direct IR Control

The T2 is designed for IR control via IR received by an audio distribution system. In the NuVo Simplese or Essentia audio distribution systems, the IR emitter outputs act as a repeater to IR signals incident on the system keypads. The T2's wired IR connector is a 3.5mm two-conductor (mono) jack labeled “IR INPUT.” Using a mono mini-to-mini patch cable, connect the IR emitter output of a Simplese or Essentia Main Unit to the IR INPUT on the T2. The two tuners in the T2 respond to separate IR codes, so the direct IR input replaces the need for external IR emitters placed over the IR receiver windows on the front of the unit, fig. 3. This connection is not used when using the Concerto NuVoNet system. The NuVo Essentia and Simplese systems are used for example, but the T2 is compatible with any audio system that is capable of repeating IR.

Fig. 2

USE ONLY NuVo		AUX IN		OUT		AUX IN	OUT
					TRIGGER		TRIGGER
	NV-T2PAS		L			L
POWERED ANTENNA SYSTEM					ON=+12V		ON=+12V
			R		AUDIO	R	AUDIO
					OUTPUT		OUTPUT
IN
ANTENNA INPUT				TUNER B			TUNER A
VARIABLE		VARIABLE			VARIABLE		VARIABLE
OUTPUT	SPEAKER	OUTPUT	SPEAKER		OUTPUT	SPEAKER	OUTPUT
TIP=L	40W/6 OHMS X 2	TIP=L	40W/6 OHMS X 2		TIP=L	40W/6 OHMS X 2	TIP=L
	LEFT RIGHT		LEFT	RIGHT		LEFT RIGHT
RING=R		RING=R			RING=R		RING=R
FIXED		FIXED			FIXED		FIXED
OUTPUT		OUTPUT			OUTPUT		OUTPUT
ZONE 1		ZONE 2			ZONE 3		ZONE 4

1	2	3	4	5	6	1	2	3
						CONNECT TO
	L		L		L	NV-I8X
						USE NV-SLC1
						CABLE
	R		R		R
1	2	3	4	5	6	4	5	6

SOURCE INPUTS SOURCE LINK SOURCE STATUS

Fig. 3

NuVoNet

Model NV-T2DF

Dual XM Tuner

IR PASS-THRU

NuVo Techonlogies LLC•Cincinnati Ohio USA

IN

OUT

www.nuvotechnologies.com

USB

RS 232

IR INPUT

RTE

K

TERTEK

SYSTEM

3033118

SPEAKER

VARIABLE

VARIABLE

VAR.

OUTPUT

SPEAKER

OUTPUT

SPEAKER

OUT

40W/6 OHMS X 2

TIP=L

40W/6 OHMS X 2

TIP=L

40W/6 OHMS X 2

RS 232

LEFT

RIGHT

LEFT

RIGHT

LEFT RIGHT

RING=R

RING=R

FIXED

FIXED

FIX.

OUTPUT

OUTPUT

OUT

ZONE 5

ZONE 6

ZONE 7

ZONE 8

PROGRAM

USE CNLY WITH 250V FUSE

1

2

3

4

1

2

3

SUM1

SYS ON

CONNECT TO

CONNECT TO

MODEL NV-I8M

AUDIO DISTRIBUTION SYSTEM

NV-I8EZP1

NV-I8X

SIX SOURCE EIGHT ZONE

120V

60Hz 500W FUSE:T5 A

USE NV-NC1

USE NV-SLC1

NuVo Technologies Cincinnati Ohio USA

www.nuvotechnologies.com

CABLE

CABLE

5

6

7

8

4

5

6

SUM2

EXT. MUTE

CONFORMS TO

UL STD.6500

ZONE TRIGGER OUTPUTS

EMITTER OUTPUTS

SYSTEM

NETWORK

DIGITAL LINK

CERTIFIED TO

3033118

CAN/CSA STD.E60065

Page 8