Hardware Installation
15
Use the following procedure to install memory DIMMs into the slots
on the motherboard. Note that there is only one gap near the center
of the DIMM slot. This slot matches the slot on the memory
DIMM to ensure the component is installed properly.
1. Unlock a DIMM slot by pressing the module clips outward.
2. Align the memory module to the DIMM slot, and insert the
module vertically into the DIMM slot. The plastic clips at both
sides of the DIMM slot automatically lock the DIMM into the
connector.
Installing the Motherboard The sequence of installing the motherboard into the chassis depends
on the chassis you are using and if you are replacing an existing
motherboard or working with an empty chassis. Determine if it
would be easier to make all the connections prior to this step or to
secure the motherboard and then make all the connections. Use the
following procedure to install the I/O shield and secure the
motherboard into the chassis.
Note: Be sure that the CPU fan assembly has enough clearance for the chassis
covers to lock into place and for the expansion cards. Also make sure the
CPU Fan assembly is aligned with the vents on the covers.
Installing the I/O Shield
The motherboard kit comes with an I/O shield that is used to block
radio frequency transmissions, protects internal components from dust
and foreign objects, and promotes correct airflow within the chassis.
Before installing the motherboard, install the I/O shield from the
inside of the chassis. Press the I/O shield into place and make sure it