Nvidia NVIDIA Quadro manual Setting Up For Testing

6.Click anywhere on the message above (if the message disappears, right click on the desktop and select Properties/Settings/Advanced/Quadro FX xxxx/SLI multi-GPU). Check the “Enable SLI multi-GPU” as shown in the screen capture below and select OK.

Select “Restart”.

Setting Up For Testing

The system is now setup and configured for SLI. When you log back into Windows, you will default into “SLI Frame Rendering” (single screen) mode. SPECviewperf benchmarks are run in “SLI Frame Rendering” mode.

SPECviewperf is the benchmark that NVIDIA currently uses to analyze SLI performance for NVIDIA Quadro graphics. An example of the benchmark results we have recorded can be found at the bottom of this document.

Before running the SPECviewperf benchmarks, please ensure the display resolution is set to 1280 x 1024 (right click on the desktop and select Properties/Settings).