Nvidia NVIDIA Quadro manual Comparison Benchmark Results SLI Frame Rendering for Windows

You will then need to select the appropriate profile in the control panel. You can do this by selecting: Properties/Settings/Advanced/Quadro FX xxxx/Performance & Quality Settings. In the “Active profile” drop-down menu, select “3D App – Modeling AFR”.

Finally, you need to turn “Vertical sync” off. While still in the “Performance & Quality Settings” window, check the “Vertical sync” box under the “Settings for 3D App – Modeling AFR”. Then un- check the box at the bottom of the window that reads “Application-controlled”.

Select “Apply” and “OK”. You are now ready to run the SPECviewperf benchmarks.

You can download the SPECviewperf benchmarks at: www.spec.org/benchmarks.html#gpc

Comparison Benchmark Results (SLI Frame Rendering for Windows)

Test platform:

HP xw9300 workstation

NVIDIA nForce Professional MCP

Two AMD Opteron 250 processors (2.39 GHz)

1 or 2 NVIDIA Quadro FX 4400 graphics boards

2 GB RAM ECC Registered DRAM Microsoft Windows XP Professional SP2 NVIDIA graphics driver version 77.13

SPECviewperf 8.1 results

Benchmarks	SLI: Two GPUs	Single GPU
	Two NVIDIA Quadro FX 4400 boards	One NVIDIA Quadro FX 4400 board
3dsmax-03	36.02	34.38
catia-01	27.97	26.63
ensight-01	30.02	21.83
light-07	21.87	21.78
maya-01	54.19	53.97
proe-03	61.11	54.96
sw-01	34.04	25.33
ugs-04	54.59	37.02