NXP Semiconductors TFA9812 - page 46

TFA9812_2 © NXP B.V. 2009. All rights reserved.
Preliminary data sheet Rev. 02 — 22 January 2009 46 of 66
NXP Semiconductors TFA9812
BTL stereo Class-D audio amplifier with I2S input
[1] IP is the current through the analog supply voltage (VDDA) pin added to the current through the power supply voltage (VDDP) pin.
[2] Thermal foldback temperature sensor is not located at hottest spot. Hottest spot is 12 °C higher.
[3] Current limiting concept: in overcurrent condition no interruption of the audio signal in case of impedance drop.
[4] PLL output frequency not external available.
Thermal Foldback (TF)
Tact(th_fold) thermal foldback
activation
temperature
[2] 118 125 132 °C
OverTemperature Protection (OTP)
Tact(th_prot) thermal protection
activation
temperature
- - 160 °C
OverVoltage Protection (OVP)
VP(ovp) overvoltage
protection supply
voltage
20 22.3 24 V
UnderVoltage Protections (UVP)
VP(uvp) undervoltage
protection supply
voltage
UVP on VDDA 7 7.5 8 V
UVP on VDDA(3V3) 1.6 2.2 3.0 V
OverCurrent Protection (OCP)
IO(ocp) overcurrent
protection output
current
[3] 3.0 3.3 3.6 A
Window Protection (WP)
Vooutput voltage high level - VDDA − 1- V
low level - REFA + 1 - V
OverFrequency Protection (OFP)
fOFP Overfrequency
protection frequency At PLL output frequency [4] 100 140 185 MHz
UnderFrequency Protection (OFP)
fUFP Underfrequency
protection frequency At PLL output frequency [4] 30 45 60 MHz
Table 55. DC characteristics
…continued
Unless specified otherwise, V
DDA
=V
DDP
= 12 V, V
SSP1
= V
SSP2
= 0 V, V
DDA(3V3)
=V
DDD(3V3)
= 3.3 V,
V
SS1
=V
SS2
= REFD = REFA = 0 V, T
amb
=25 ° C, R
L
=8 Ω , f
i
= 1 kHz, f
s
= 44.1 kHz, f
sw
= 400 kHz, 24-bit I
2
S input data,
MCLK clock mode, typical application diagram (Figure 13).
Symbol Parameter Condition Min Typ Max Unit