STEP 5
5-1. Fix 3pcs pins of 60mm length to the emitter screen with 3pcs M6 flange nuts then tighten them.
STEP 7
on the
b u r n e r t h r o u g h t h e
e m i t t e r
screen.
7-2. Put the ends of the guard into the holes of the burner.
STEP 6
6-1. Put the emitter screen on the burner.
6-2. Use 4pcs 3/16” bolts to connect the emitter screen to the burner. Tighten the bolts.
STEP 8
8-1. Put 3pcs washers on each pins of the 60mm length.
5