AFTER OPERATING
Gas control is in OFF position.
Disconnect Gas line.
Heater is upright in a secure location.
MAINTENANCE
To enjoy years of outstanding performance from your heater, make sure you perform the following maintenance activities on a regular basis: Inspect the visible portion of the hose before each use of the appliance. Inspect the entire hose assembly at least annually.
Air flow must be unobstructed. Keep controls, burner, and circulating air passageways clean. Signs of possible blockage include: Gas odor with extreme yellow tipping of flame. Heater does NOT reach the desired temperature. Heater glow is excessively uneven.
Heater makes popping noises. Spiders and insects can nest in burner or orifices. This dangerous condition can damage heater and render it unsafe for use. Clean burner holes by using a
Compressed air may help clear away smaller particles.
Carbon deposits may create a fire hazard. Clean dome and emitter
with warm soapy water if any carbon deposits develop.
Note : In a
Frequently check for corroded areas and repair them promptly.
Keep exterior surfaces clean.
STORAGE
Between uses:
Turn Control Knob OFF.
Disconnect LP source.
Store heater upright in an area sheltered from direct contact with inclement weather(such as rain, sleet, hail, snow, debris).
If desired, cover heater to protect exterior surfaces and to help prevent build up in air passages.
Note: Wait until heater is cool before covering.
During periods of extended inactivity or when transporting:
Turn Control Knob OFF.
Disconnect LP source and move to a secure,
Store heater upright in an area sheltered from direct contact with inclement weather (such as rain, sleet, hail, snow, dust and debris).
If desired, cover heater to protect exterior surfaces and to help prevent build up in passages.
11
