Oki ML3320, ML3321 manual Rear Feed Form Tear-Off OFF Bottom Feed Form Tear-OFF OFF

This feature is normally turned off. To activate it:

1. Press SHIFT (➋) + SEL (➊).

➊	➋	➌		➍
SEL
		LF	FF/LOAD	TEAR	PARK	QUIET
SEL
MENU	SHIFT	Micro Feed	Micro Feed				TOF
		Down	Up
EXIT		GROUP	ITEM	SET	PRINT
POWER	ALARM		MENU

2.Press GROUP (➌) until one of the following lines appears, depending on which paper feed you are using:

REAR FEED Form Tear-Off OFF BOTTOM FEED Form Tear-OFF OFF

3.Press SET (➍) until the time interval you wish to select appears in the third column.

4.Press SHIFT (➋) + SEL (➊) to exit Menu Mode and save the setting.

Note: Some programs pause occasionally while sending data. If the pause is too long, the paper will advance to the tear-off position until more data is received. This extra paper movement can cause uneven print registration in graphics. If you have this problem, use the menu to turn off this feature.

Paper Park Feature

						➊
SEL
		LF	FF/LOAD		TEAR	PARK	QUIET
SEL
MENU	SHIFT	Micro Feed		Micro Feed				TOF
		Down		Up
EXIT		GROUP		ITEM	SET	PRINT
POWER	ALARM			MENU

To retract rear-feed paper from the paper path, press PARK (➊).

22 ML3320/21