Connecting the data cable

The printer comes with a standard high speed bidirectional IBM Centronics compatible parallel data interface as standard. This requires a IEEE1284 compliant parallel printer cable, not more than 1.8m in length.

1Connect one end of the parallel data cable (36-pin Centronics) to the printer’s data interface (1).

1

2Connect the end containing the standard DB25 connector to the host PCs parallel data port (usually designated as LPT1).

Connecting power to your printer

English

 

A suitable AC power cable is supplied with your printer,

 

terminated with the appropriate plug for connection to a

 

standard AC wall outlet.

 

1 Ensure the printer on/off switch (1) is off.

 

2

1

2Connect the cable to the power socket (2) on the rear of the printer.

3Connect the other end of the power cable to a suitable nearby AC power socket outlet.

Setup Guide

13

Page 13
Image 13
Oki PAGE 8W, PAGE 8P setup guide Connecting the data cable, Connecting power to your printer