EN
16

 

 

 

 

 

 

 

Power supply

 

 

 

 

Battery settings

 

 

Notes

 

 

 

• Manganese batteries may not be used in

 

 

 

 

 

 

Select to match the battery you are using.

 

 

this recorder.

 

 

 

 

 

 

 

 

• When changing batteries, AAA alkaline

 

1

Replace the batteries and turn on

 

 

batteries or Olympus Ni-MH rechargeable

 

 

the recorder (P.15).

 

 

batteries are recommended.

 

 

Press the + or − button to change

 

 

 

2

 

 

• Be sure to stop the recorder before

 

1

 

 

 

the setting.

 

replacing the batteries. Unloading the

 

 

 

batteries while the recorder is in use may

 

 

Battery type

Power

 

cause a malfunction such as corrupting

 

 

 

 

 

 

 

 

the file, etc. If you take out the batteries

 

 

 

 

 

 

 

 

 

 

while recording, you will lose your

 

 

 

 

 

currently recorded file because the file

 

 

 

 

supply

 

 

 

 

 

 

header will not be able to close.

 

 

 

 

 

• If it takes longer than 15 minutes to

 

 

 

 

 

 

replace the dead batteries or if you take

 

 

 

 

 

 

the batteries in and out repeatedly at

 

 

 

 

 

 

short intervals, you may have to redo the

 

 

[Ni-MH] (õ):

 

 

battery and time settings. In this case, the

 

 

Select when using the Olympus Ni-

 

 

[Battery] screen will appear. For more

 

 

 

 

 

 

MH rechargeable batteries (BR404).

 

 

details, see “Battery settings”.

 

 

 

 

 

 

[Alkaline] (ú):

 

 

• Remove the batteries if you are not going

 

 

Select when using alkaline batteries.

 

 

to use the recorder for an extended

 

 

 

 

 

3

Press the `OK button to

 

 

period of time.

 

 

 

• When replacing rechargeable batteries,

 

 

complete the setting.

 

 

be sure to use Ni-MH rechargeable

 

 

• If the “Hour” indicator flashes in the

 

 

batteries (optional). The use of other

 

 

display, see “Setting time and date

 

 

manufacturers’ products can damage the

 

 

[Time & Date]” (P.22).

 

 

recorder and should be avoided.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Battery indicator

 

 

 

 

 

The battery indicator on the display

 

 

 

 

 

changes as the batteries lose power.

 

 

 

 

 

• When [æ] appears on the display,

 

 

 

 

 

 

replace the batteries as soon as

 

 

 

 

 

 

possible. When the batteries are

 

 

 

 

 

 

too weak, [s] and [Battery Low]

 

 

 

 

 

 

will appear on the display and the

 

 

 

 

 

 

recorder will shut down.