Power supply
will be changed depending on the remaining amount and the state of batteries.
Connect to the USB connecting AC adapter (optional) to charge
3While the recorder is during stop mode or turned off, connect the USB cable to the connecting terminal on the bottom of the recorder.
1
supply Power
It can be charged by connecting to the USB connecting AC adapter (A514) (optional).
|
| To the USB |
| ||
• Before connecting the AC |
| connector |
adapter, switch the USB |
|
|
connection setting to |
|
|
[AC Adapter] (☞ P.76). |
|
|
• Before connecting the USB |
|
|
cable, exit HOLD mode (☞ P.21). |
|
|
|
|
|
EN
18
4 Press the `OK button to start
1 Plug the recorder’s USB cable charging. into the AC adapter.
To the USB connecting AC adapter’s (A514) USB connector
• While [Press OK to start charging] is flashing, press the `OK button.
5 Charging is completed when [Battery Full] is displayed.
2Plug the AC adapter into AC outlet.
To the
AC outlet
Notes
• The recorder cannot be charged when the PC is not turned on. It may not also be charged when the PC is in standby, hibernate, or sleep mode.