Menu setting method

2Sets the detection time.

[1 second] [2 seconds] [3 seconds]

[4 seconds] [5 seconds] [10 seconds]: If the input (recording level) is equal to or below the specified level for longer than the specified detection time, the recorder will return to the standby mode.

Adjust the voice sync level:

1Press the REC (s) button to start recording.

•To use voice sync recording, set

[V-Sync. Rec] to [On] and specify a detection time.

2Press the 9or 0button to adjust the voice sync level.

•The voice sync level can be set to any of 23 different values.

•The higher the value, the more sensitive the recorder will be to sounds. At the highest value, even the faintest sound will activate recording.

4Voice sync recording stops automatically.

•If sound at a volume below the voice sync level continues for the specified time, voice sync recording will end automatically, and the recorder will return to the standby mode of Step 3. Every time the recorder enters standby mode, the file will be closed and recording will continue in a different file.

•To stop the recorder during voice sync recording, press the STOP (4) button.

•When using the [V-Sync. Rec] function, the following functions are not available.

•[VCVA] (☞ P.55)

Timer Rec

See “Timer recording [Timer Rec]” (☞ P.70).

4

method setting Menu

a

aVoice sync level (moves to the right/left according to the set level)

3Press the REC (s) button again.

•The recorder will go into standby. [Standby] will flash on the display and the LED indicator light will flash.

•When the input is at or above the voice sync level, recording will start automatically.

EN

57