Power supply
Note | 3 While the recorder is during stop |
• When playing a voice/music file, the | mode or turned off, connect |
recorder may be reset due to the | the USB cable to the connecting |
reduction of the voltage output of the | terminal on the bottom of the |
batteries depending on the volume level | recorder. |
even if [º] is displayed in the battery |
|
indicator. In this case, lower the volume of |
|
the recorder. |
|
Charging by connecting to a computer via USB
You can charge the batteries by connecting to a PC’s USB port. When charging, be sure to correctly place the rechargeable batteries (supplied) into the recorder (☞ P.15).
Before connecting the USB cable, |
|
| Press the `OK button to start |
| 4 | ||
exit HOLD mode (☞ P.21). |
|
| charging. |
|
|
|
|
Do not charge primary batteries such as alkaline or lithium batteries. It may cause battery leakage or heating, which may cause the recorder to malfunction.
1
supply Power
1 | Boot the PC. |
| • While [Press OK to start charging] is |
| Connect the USB cable to the USB |
| flashing, press the `OK button. |
2 | |||
| port of the PC. | 5 | Charging is completed when battery |
|
|
| indication becomes to [¿]. |
Charging time: approximately 3 hours * * It shows the approximate time when charging the rechargeable battery
fully from no remaining power at the EN room temperature. The charging time
17