Setting time and date [Time & Date]

Notes

•If you press the `OK button during the setup operation, the recorder will save the items that were set to that point.

•After setup, a message will sound saying that If the guidance is not required, select [Off], and the screen goes into [Voice Guide] (☞ P.75) setup. If you don’t want the guidance feature, select [Off].

Changing the time and date

While the recorder is during stop mode, press and hold the STOP (4) button to display the [Time & Date] and [Remain]. If the current time and date is not correct, set it using the procedure below.

MENU/SCENE button

F2 button

+ − button `OK button

1While the recorder is during stop mode, press the MENU/SCENE button.

•The menu will appear on the display (☞ P.51).

2Press the + or − button to select [Device Menu] tab.

•You can change the menu display by moving the settings tab cursor.

1

 

Press the `OK button to move

Setting

3

time

 

the cursor to the item to set.

 

 

 

• [Device Menu] will appear on the

and

 

display.

 

date

4

Press the + or − button to select

 

 

[Time & Date].

 

5Press the `OK button.

•[Time & Date] will appear on the display.

•The “Hour” will flash on the display, indicating the start of the Time and Date setup process.

 

The following steps are the same as

 

 

Step 1 through Step 3 of “Setting time

 

 

and date [Time & Date]” (☞ P.22).

EN

6

Press the F2 (EXIT) button to

 

close the menu screen.

23