Olympus DS-2200 manual Inserting and Ejecting a Card, Inserting a Card

Inserting and Ejecting a Card

1

Inserting a Card

Insertingand Ejectinga Card 1

2

3

14

1Slide the card cover lock to the direction indicated by the arrow.

The card cover is unlocked and the message “CARD COVER OPEN” appears on the display. When this message appears, the power is switched off.

2Face the card the correct way and insert it into the card slot as shown in the illustration.

•Insert the card keeping it straight.

•The card stops with a click when it is inserted all the way.

•Inserting the card the wrong way or at an angle could damage the contact area or cause the card to jam.

•If the card is not inserted all the way, data may not be written to the card.

3Close the card cover securely.

Card inserted fully into the slot

The recorder sounds beeps* and the message “PLEASE WAIT” on the display flashes for a short time.

Card not inserted fully into the slot

When the card cover is closed, the message “INSERT CARD” on the display flashes for a short time. With the recorder in this condition, pressing any button sounds beeps* and flashes the message “INSERT CARD” again.

*When the system sounds are enabled.

................................................................................................

Notes

•If an unformatted card is inserted, the recorder automatically displays the menu to format the card (☞ P.37).

•Never use any card other than one that has been formatted on this unit or on a CAMEDIA series Olympus digital camera (☞ P.37).