Olympus DS-2200 manual To enable alarm sound only, Minute indicator flashes

Press the PLAY button to accept the minute.

9,1112 8,10

9,1112 8,10

8Press the FF or REW button to set the hour.

9Press the PLAY button to accept the hour.

The minute indicator flashes.

10 Press the FF or REW button to set the minute.

11

12 Press the STOP button to close the menu.

An alarm tone will sound at the scheduled time. Press any button while the alarm sounds to play the file you associated with the alarm.

To enable alarm sound only

To set an alarm without audio playback, set the alarm while an empty folder is selected.

•Start setting from step 3 (☞ P.32) of “Alarm Playback Function”.

•When alarm sound goes at the preset time, pressing any button stops the sound.

4

Alarm Playback

Function (ALARM)

.............................................................................................................................................................................

Notes

•The alarm playback function can be set for only one file at a time.

•The alarm will sound at the scheduled time every day unless the alarm playback setting is cleared.

•If you wish to change the file for alarm play, first turn the alarm settings “OFF”, then make any desired new alarm settings.

•The alarm will sound for 5 minutes and then stop.

•If the recorder is in use at the scheduled time, the alarm will sound after the operation is finished.

•The alarm will sound at the scheduled time even if the recorder is set to hold. The recorder begins to play

the file associated with the alarm when you press any button.
• The alarm playback setting is cleared if the selected file is erased.	33