SettingTime/Date (Time&Date)
If you set the date and time beforehand, the information when the file is recorded is automatically
stored for each file. Setting the date and time beforehand enables easier file management.
When you use the recorder for the first time after purchasing it, or turn the power on after having removed the batteries for one minute or longer to change them or for other purposes, the [Set Time&Date] message may appear. If the [Hour] indicator flashes, follow the steps below to set it.
| 1 | Press the 9or 0button to select |
|
| |
1 |
| the item to set. |
| Select the item from [hour], [minute], [year] | |
| [month] and [day] with a flashing point. | |
2 |
| Press the + or – button to set. |
2Follow the same steps by pressing the 9 | ||
|
| or 0 button to select the next item, and |
press the + or – button to set.
• You can choose between 12 and 24 hour display by pressing the DISPLAY button while setting the hour and minute.
Example: 5:45 P.M.
5:45 PM ←→ 17:45
(Initial setting)
• You can choose the order of the year, month, day by pressing the DISPLAY button while setting them.
Example: September 7, 2008
9M 7D 2008Y | 7D 9M 2008Y | 2008Y 9M 7D |
(Initial setting)
1
Time/Date Setting
17