4
Power Changing
Save
Changing Power Save (Power Save)
If the recorder is on and stops for 10 minutes or longer (default), the display shuts off and it goes into power save mode. You can set the time to enter power save from among [5min.] [10min.], [30min.], [1hour], and [Off].
2 |
| While the recorder is stopped, press | |
1the MENU button for 1 second or | |||
|
| longer. | |
|
| The menu opens. (☞ P97, 99) | |
1 | 2 | Press the + or – button to choose | |
[Power Save]. | |||
| 3 | Press the OK or 9 button. | |
4 | The [Power Save] setup process begins. | ||
Press the + or – button to choose | |||
|
| ||
| 4between [5min.], [10min.], [30min.], | ||
|
| [1hour] and [Off]. | |
3 |
| If the power save mode is set to [Off], the | |
| recorder will not switch over to the power | ||
| save mode. Leaving the recorder in such a | ||
|
| ||
|
| condition will result in the rapid consumption | |
|
| of batteries. | |
6 |
| Press the OK button to complete the | |
5setup screen. | |||
|
| If the 0 button is pressed, the setting will | |
|
| be canceled and it will return to the menu. | |
|
| Press the STOP button to close the | |
5 |
| menu. | |
You6 can exit power save mode by pressing any | |||
| button. | ||
84