Timer Recording (Timer Rec)
8 | Completing the setting. |
1 Press the + or – button to choose | |
[Finish]. | |
| 2 Press the OK button to complete the |
1 | setup screen. |
|
Programmed settings will be applied and the screen will return to the preset number selection menu. If the On/Off setting is set
to On, 
and 
(Timer indicator) will
2 appear on the display.
If you press the 0button without pressing the OK button, all settings will be canceled and it will return to the preset number selection menu.
aTimer indicator
When setting other preset numbers, repeat
Steps 4 through 8.
2
Recording Timer
9Press the STOP button to close the
9
menu.
..................................................................................................................................................
Notes
•If the recorder is in use at the preset start time, the timer recording will start directly after stopping the recorder.
•Even if the power if turned off or the recorder is put on Hold, timer recording will start at a specified time.
•If three timer recordings have the same starting times, [Preset 1] has the highest priority and [Preset 3] has the lowest.
•If the starting time for timer recording and alarm playback (☞ P65) is set for the same time, timer recording will have priority.
•If the batteries run out while recording based on the timer setting, the recorder will stop recording. Check the battery power before starting the timer recording.
•The microphone sensitivity switch setting will be canceled during timer recording.
•If the [Time&Date] is not correct, timer recording cannot be set at the specified time, so make sure the
[Time&Date] is correct before setting timer recording. If it is not correct, reset [Time&Date]. (☞ P18) | 45 |