SettingTime/Date (Time&Date)
| Press the OK button to complete the setup screen. |
3 | The clock will start from the set date and time. Press the OK |
3button according to the time signal. | |
1 | ........................................................................................................ |
Notes |
Time/Date Setting
•If you press the OK button during the setup operation, the recorder will save the items that were set to that point.
•After setup, a message will sound saying that If the guidance is not required, select [Off], and the screen goes into [Voice Guide] setup. (☞ P93)
If you don’t want the guidance feature, select [Off].
Changing the Time/Date
Press the STOP button while the recorder has stopped recording to check [Time&Date] and
[Remain]. If the [Time&Date] is not correct, set it using the procedure below.
1
2
3
1Press the + or – button in the menu screen, and select the [Time&Date].
See P97, 99 regarding the menu.
2Press the OK or 9 button.
The Time/Date screen appears. The hour indicator flashes, indicating the start of the Time/Date setup process.The following steps are the same as Step 1 through Step 3 of [Setting Time/Date (Time&Date)]. (☞ P17)
3Press the STOP button to close the menu.
18