Using theVariable ControlVoice Actuator (VCVA)
VCVA standby monitor setting
When [Standby Monitor] is set to [On] with the menu setting, the recording will not be output from the earphone while in VCVA standby.
When you monitor your recording with the earphone connected, you can check whether VCVA is launched or not by checking if an audio is output.
2 | While the recorder is stopped or |
1during recording, press the MENU |
button for 1 second or longer.
The menu opens. (☞ P97, 99)
1 | 2 | Press the + or – button to choose |
[VCVA]. | ||
|
| |
| 3Press the OK or 9 button. | |
| 4 | Press the + or – button to choose |
4,6 | [Standby Monitor]. | |
5 | Press the OK or 9 button. | |
| The [Standby Monitor] setup process begins. | |
| Press the + or – button to choose | |
|
| |
|
| between [On] and [Off]. |
| 3,5,7 | 6Press the OK button to complete the | |
| 7setup screen. | |
|
| If the 0 button is pressed, the setting will |
|
| be canceled and it will return to the menu. |
|
| Press the STOP button to close the |
8 | 8menu. | |
| If it returns to the menu screen during recording, | |
| press the 0button to close the menu screen. | |
|
| |
2
the Using
Control Variable
Actuator Voice
31