#Caution
• You cannot use an external flash and the electronic view finder at the same time.
• When carrying the camera, do not hold it by the electronic view finder. The camera may separate from the electronic view finder and drop.
• Do not leave the camera with the electronic view finder attached in a location subject to direct sunlight.
• Keep the shoe cover in a safe place to avoid losing it.
3 Remove the connector cover from the electronic view finder.
4 Align the electronic view finder with the hot shoe on the camera body, and slide it in until it stops.
• Insert the electronic view finder by pushing on its lower part.
5 Turn on the camera.
6 Each press of the ubutton switches between the monitor display and electronic view finder display.
Turn off the camera.
Slide off the hot shoe cover.
Using electronic view finder (sold separately)

If you use the electronic view finder (sold separately: VF-2), you can view the shooting screen in the finder. This is convenient when you are in a very bright location, such as under direct sunlight, where it is difficult to view the monitor, or are using the camera at a low angle. Also refer to the electronic view finder’s manual.

1

2

•You can adjust the brightness and color temperature of the electronic view finder. [EVF ADJUST]: g“Accessory port menu options” (P. 90)

11

7 Turn the diopter adjustment ring to

a position where the image on the

Information

viewfinder can be seen clearly.

• Adjust the electronic view finder to your

preferred angle (up to 90 degrees).

 

102EN