You can reset all print reservation data or just the data for selected pictures.
1
2
Press Q during playback and select [<].
Select [<] and press Q.
•To remove all pictures from the print order, select [RESET] and press Q. To exit without removing all pictures, select [KEEP] and press Q.
3 Press HIto select images you wish to remove from the print order.
•Use Gto set the number of prints to 0. Press Q once you have removed all the desired pictures from the print order.
4 Select the date and time format and press the Q button.
• This setting is applied to all frames with print reservation data.
5 Select [SET] and press the Q button.
Direct printing (PictBridge)By connecting the camera to a
81
pictures Printing
2
Connect the camera to the computer using the supplied USB cable and turn the camera on.
Smaller terminal
USB cable
USB port 
•Use a fully charged battery for printing.
•When the camera is turned on, a dialog should be displayed in the monitor prompting you to choose a host. If it is not, select [AUTO] for [USB MODE] in the camera custom menus. g“Custom Menu” (P. 78)
Use FGto select [PRINT]. |
| USB | |||
• | [ONE MOMENT] will be displayed, followed by a |
| STORAGE |
| |
|
| MTP |
| ||
• | If the screen is not displayed after a few minutes, |
|
| ||
| EXIT |
|
| ||
| disconnect the USB Cable and start again from |
|
| ||
|
|
|
|
| |
| Step 1. |
| SET |
| |