You can zoom in on a portion of the frame when adjusting focus. Choosing a high zoom ratio allows you to use autofocus to focus on a smaller area than is normally covered by the AF target. Autofocus is also available over a wider area of the frame than with AF target selection.
Q/ U (Press and hold)
1
U
U
options
|
|
| L N |
|
|
| L N |
|
|
|
|
| 01:02:03 |
|
| 01:02:03 |
| 10x | |
250 | F5.6 | 0.0 | 30 | 250 | F5.6 | 0.0 | 30 | U | |
Shooting display | Zoom frame AF |
| Zoom AF | ||||||
1 Press the Ubutton to display the zoom frame.
•If the camera was focused using autofocus just before the button was pressed, the zoom frame will be displayed at the current focus position.
•Use FGHIto position the zoom frame.
•Press INFO and use FGto choose the zoom ratio.
Positioning the zoom frame
7x
10x
14x
Area in which zoom frame | Comparison of AF |
can be positioned | and zoom frames |
2 Press the Ubutton again to zoom in on the zoom frame.
•Use FGHIto position the zoom frame.
•Press INFO and use FGto choose the zoom ratio.
3 Press the shutter button halfway to initiate autofocus.
$Notes
•Autofocus is available and pictures can be taken both when the zoom frame is displayed and when the view through the lens is zoomed in.
•At higher zoom ratios, autofocus is more accurate when the view though the lens is zoomed in.
#Caution
• Zoom is visible only in the monitor and has no effect on the resulting photographs.