11

Information

Pixel mapping - Checking the image processing functions

The pixel mapping feature allows the camera to check and adjust the image pickup device and image processing functions. After using the monitor or taking continuous shots, wait for at least one minute before using the pixel mapping function to ensure that it operates correctly.

1 Select [PIXEL MAPPING] in c Custom Menu (P. 78) tab b. 2 Press I, then press the Q button.

•The [BUSY] bar is displayed when pixel mapping is in progress. When pixel mapping is finished, the menu is restored.

#Caution

• If you accidentally turn the camera off during pixel mapping, start again from Step 1.

Card basicsUsable cards

In this manual, all storage devices are referred to as “cards.”

The following types of SD memory card

(available separately) can be used with this camera: SD, SDHC, and SDXC. For the latest information, please visit the Olympus website.

SD card write protect switch

The SD card body has a write protect switch. If you set the switch to

 

LOCK

 

the “LOCK” side, you will not be able to write to the card, delete data

 

 

or format. Return the switch to the unlock position enable writing.

 

 

#Caution

•The data in the card will not be erased completely even after formatting the card or deleting the data. When discarding, destroy the card to prevent leakage of personal information.

Formatting the card

Cards formatted on a computer or other camera must be formatted with the camera before they can be used.

All data stored on the card, including protected images, is erased when the card is formatted. When formatting a used card, confirm there are no images that you still want to keep on the card.

1 Select [CARD SETUP] in shooting menu W(P. 108).

2 Select [FORMAT].

3 Select [YES] and press Q.

• Formatting is performed.

CARD SETUP

ALL ERASE

FORMAT

BACKSET

96EN