Drive

Drive mode

Single-frame shooting/Sequential shooting/Self-timer

Sequential shooting

3 frames/sec.

Self-timer

Operation time: 12 sec., 2 sec.

External flash

 

Synchronization

Synchronized with the camera at 1/180 sec. or less

Flash control mode

TTL-AUTO (TTL pre-flash mode)/AUTO/MANUAL

Flash attachment

Hot shoe

External connector

 

Multi-connector (USB connector, AV connector)/HDMI mini connector (Type C)/Accessory port

Power supply

Battery

Li-ion Battery (BLS-5) ×1

Dimensions/weight

 

Dimensions

115.4 mm (W) × 72.7 mm (H) × 42.0 mm (D) (4.5" × 2.9" × 1.7")

 

(excluding protrusions)

Weight

Approx. 362 g (0.8 Ib.) (including battery and memory card)

Operating environment

 

Temperature

0 °C – 40 °C (32 °F – 104 °F) (operation)/–20 °C – 60 °C (–4 °F – 140 °F)

 

(storage)

Humidity

30% – 90% (operation)/10% – 90% (storage)

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

Battery/charger„BLS-5 Lithium ion battery

MODEL NO.

BLS-5

Product type

Rechargeable Lithium ion battery

Nominal voltage

DC 7.2 V

Nominal capacity

1150 mAh

No. of charge and

Approx. 500 times (varies with usage conditions)

discharge times

 

Ambient temperature

0 °C – 40 °C (32 °F – 104 °F) (charging)

Dimensions

Approx. 35.5 mm (W) × 12.8 mm (H) × 55 mm (D) (1.4" × 0.5" × 2.2")

Weight

Approx. 44 g (0.1 Ib.)

„BCS-5 Lithium ion charger

MODEL NO.

BCS-5

Rated input

AC 100 V – 240 V (50/60 Hz)

Rated output

DC 8.35 V, 400 mA

Charging time

Approx. 3 hours 30 minutes (room temperature if using BLS-5)

Ambient temperature

0 °C – 40 °C (32 °F – 104 °F) (operation)/-20 °C – 60 °C (-4 °F – 140 °F) (storage)

Dimensions

Approx. 62 mm (W) × 38 mm (H) × 83 mm (D) (2.4" × 1.5" × 3.3")

Weight

Approx. 70 g (0.2 Ib.) (without AC cable)

*The AC cable supplied with this device is for use only with this device and should not be used with other devices. Do not use cables for other devices with this device.

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE OR OBLIGATION ON THE PART OF THE MANUFACTURER.

11

Information

EN 113