Olympus MAFP-1E manual Computer must be restarted before you can use your software

38

E

INSTALLING THE SOFTWARE (Windows 3.1)

To install the provided software when using Windows 3.1

1Turn the computer and start up Windows 3.1.

2Insert the Driver Setup Diskette (FPD-2E) in the FDD.

3In the Program Manager, select [Icons], then [Run]. Enter “a:\setup16.exe” and click the OK button.

4When the Setup window appears, follow the on-screen instructions to install your software.

5When installation is complete, a dialog box appears asking

whether or not to restart your computer.

6Restart the computer to initialize the installed software.

CAUTION

If you specify the software installation destination directory name using 2-byte characters such as Chinese or Japanese letters when installing software in your computer, the operation after installation may be abnormal at times. To prevent this, be sure to use 1-byte characters in the installation destination directory name.

◆The computer must be restarted before you can use your software

◆If your FDD is not drive A, check the FDD drive and execute “Setup16.exe” from that drive.

◆Read the latest information on your software in the “README.TXT” file stored on the floppy disk.

◆“Setup.exe” is the setup program for Windows 95. Do not run this program.