3 Open the flap on the opposite side.

Caution

•Do not allow the ink ribbon package to become deformed and do not take out the ink ribbon directly with your hands.

4

5

Align the installation direction marks (s•t) on the flaps on the ink ribbon package and ink cassette (ribbon holder).

Attach the ink ribbon to the ink cassette. (Press the ink cassette onto the ink ribbon until all four locations snap into place.)

Tip

•The procedure for installing the A6 wide-size passport ink ribbon differs from that of ink ribbon used for ordinary printing. Follow steps 1 through 3 previously stated, but replace steps 4 and 5 with the following procedure. Then, continue with steps 6 through 11.

Take out the ink ribbon from the ink ribbon package and remove the stoppers from the bobbin of the ink ribbon.

Green

White

Attach the bobbin of the ink ribbon to the ink cassette (ribbon holder) until it clicks.

10