POWER ON | Setup | Input Selection | Paper Selection | Picture Selection | Printing Modes |
C. Registering the Background Image
This procedure is used to register settings related to the shading and filter to be used with the background image.
1 Select whether or not to register the background image using the left and right arrow buttons.
The display changes as shown below each time the left or right arrow button is pressed.
YESNO
Tip
•If you do not want to register the background image, select “NO” and press the OK/SELECT button. The display returns to the Setup menu.
2 Press the OK/SELECT button.
If “YES” has been selected, registration of the background image begins and that progress is displayed.
The registered background image is displayed for about 2 seconds and then the display returns to the Setup menu.
Caution
•The amount of time that it takes to register the background image differs depending on the size of the image and the degree of detail of the pattern. Some images may not be registered depending on the size or pattern.
•The number pixels of pictures registered for background should be an even number both vertically and horizontally.
•Do not remove the
➜
➜
55