• Color Adjustment using the “Driver” Setting

If you selected the “Driver” checkbox under “Color Adjustment” in the “Paper” tab, you will be able to use a preview display as you adjust the color here.

Tip

•The color tone of the preview may differ from that of actual prints. The displayed color tone should only be used as a rough indication of color tone.

1Click on the “Color Adjustment” tab.

Tip

•The “Color Adjustment” tab is only available when the “Driver” checkbox is selected under “Color Adjustment”.

2Adjust the color.

Gamma:

Change the half-tone density (–5-5) of R, G and

 

B, respectively, with the control bar or arrow

 

tool. Clicking on “Same” allows R, G and B to

 

be changed all at once.

Brightness:

Change the total picture density (–5-5) of R, G

 

and B, respectively, with the control bar or

 

arrow tool. Clicking on “Same” allows R, G

 

and B to be changed all at once.

Contrast:

Adjust the contrast (–5-5) of R, G and B,

 

respectively, with the control bar or arrow tool.

 

Clicking on “Same” allows R, G and B to be

 

adjusted all at once.

Defaults:

Returns the setting of each parameter to the

 

initial setting.

Load:

Load saved color adjustment values.

Save:

Saves the set values.

Tips

•The procedure for changing color adjustment from the printer and that for changing color adjust- ment from a PC are the same.

•Adjustments made using the driver override those made on the printer.

35