Identifying the Parts

●Printer Body

Operation panel

This is used when printing by inserting a card (xD-Picture Card/PC card) directly into the printer. (Refer to the section on the “Operation Panel” on page 7 for further details.)

Printer cover

This is opened when installing or replacing the ink cassette.

Power (ON/OFF) switch

Paper output tray

This is pulled out when printing.

Paper cassette compartment lid

Dust cover

The dust cover is opened when the paper cassette is inserted.

Cover eject lever

xD-Picture Card slot

xD-Picture Card containing recorded pictures is inserted into this slot when printing directly from an xD-Picture Card.

PC card eject button

Paper discharge opening

Paper is discharged from this opening after printing.

PC card slot

This button is pressed to remove the PC card.

VIDEO OUT jack

This jack is used to connect the printer to a VIDEO IN port on a TV monitor.

USB connector

This connector is used to connect a USB cable from a PC.

This slot is for inserting PC cards complying with PC standard ATA specifications (PCMCIA). Type II PC cards can be used. Use a PC card adapter or similar device when printing SmartMedia, CompactFlash or Memory Stick data.

AC power connector

This connector is used to connect the power cord.

6