8 Select “Chooser” from the Apple menu.

qFirst, turn on the P-440's power and make sure it is connected to a USB port on the Macintosh using the appropriate USB cable.

wUsing the mode selector dial on the front of P-440, set the input to “USB”. After a few seconds, the P-440 should appear in the “Printer Select” list.

9 Click on the “P-440” driver icon in the left-hand window pane.

If multiple printer drivers are installed, the “P- 440” icon may not appear in the Chooser. Please use the scroll bar to locate the “P-440” printer driver.

●It may be concealed within the window as a result of all of the printer driver icons being unable to be displayed. In this case, scroll the window with the scroll bar to display the concealed icons.

10 Select “P-440” in the “Printer Select” list and then click on the “box” on the upper left-hand corner to close the Chooser.

If the “P-440” is not displayed in the “Printer Select” list when the printer driver icon is clicked, check whether or not the USB cable is connected, the printer power is on, and whether or not the printer input is set to “USB”.

Other tasks can be performed with the Macintosh during printing when “On” is selected for “Background Print”. However, the print time may be longer than when this option is “Off”.

For information on the procedure to connect the printer to the computer, refer to page 31.

This completes installation of the P-440 printer driver.

27